Alkaline Water Ionizer : DION SPECIAL

PRODUCT : Alkaline Water Ionizer
MODEL : DION SPECIAL
pH LEVEL : 10.5~8.5
SIZE : 295 X 150 X 370(W X L X H)mm
WEIGHT : 5 kg
SUITABLE WATER PRESSURE & TEMPERATURE : 3.5~3.5Kgf/Cm²,4~30℃
POWER : AC85~220V/50~60Hz

Dion Special

Convenient & economic home health care

One-Touch Type

You can drink the water that you want with just one touch operation.

Electrolytic performance tells the difference of Water Ionizer Device

7 High Power Electrode Sheets

Platinum-titanium material electrode performs important role that separates purified water into alkaline and acidic water. There is difference on alkaline water quality by the platinum-titanium plating amount and the number of electrode sheets.
It is equipped with 7 sheets of platinum-titanium plated electrode for high quality alkaline ionic water generation.
Additional advantage of platinum-titanium plated material is that it has high electric conductivity and it is harmless material for human body. It also has low electricity consumption, excellent electrolytic performance, and can implement more accurate pH, ORP along with more electrode plates, and you can drink high quality alkaline ionic water.

ALLSBON's technology ensures safe operation without program error when it changes the number of platinum-titanium electrode between 3~9 sheets.

Non-Transformer SMPS Type

Classic power supply transformers that are used for general alkaline water ionizer are designed to withstand only with 100-150W/24-30V/5A power supply, and this causes a lot of PCB program error or component malfunction due to overheat in the area where overcurrent can be generated during electrolytic operation. 

We eliminate classic transformer type which affects home appliances because of unstable primary power source, and implement SMPS type power supply that can withstand outside 200-350W/24-35V/10-20A range. It lowers
 
 
overheating rate
 
of the device even with more than 2 times of overcurrent environment than existing devices, and it greatly enhances economic and safety of the device by reducing program error rate. 

* Caution) It is especially recommended to use SMPS type because overcurrent increases inside electrolytic vessel at high longitude areas (America, Europe, Southeast Asia, etc.) that causes program error.

Difference of purity comes from Filter

18-Stage Filtering System Composite Filter

ALLSBON's technology is distinguished by its way to generate water

ALLBON exclusive Automatic Cleaning (Basic Feature)

Cleaning is one of the most important issues with water ionizer. The purpose of ionic water cleaning is to remove scale (Ca, Mg) attached to electrode plate.
Alkaline ionic water cannot be generated properly due to decline of electrolytic performance when there is a lot of scale. ALLSBON's alkaline ionizer is equipped with pre-cleaning function as its basic feature, and it also performs cleaning for 15 seconds using more than 50 times of automatic polarity change/second after water discharge as shown in following Figure.

You can choose one cleaning type from following 3 cleaning types.
1. Pre-Cleaning, 2. Post Cleaning 3. Pre-Cleaning + Post-Cleaning

Use of Anti-Clogging PBT Flexible Hose to prevent clogging by scale

Stainless steel material flexible hose at water outlet area can be frequently clogged because of mineral component scale such as calcium, etc. 
We developed and adopted harmless PBT material (environmental regulation standard approved material) hose to solve the clogging by scale problem.

Our R&D is trying to develop state-of-the-art and most convenient feature

Artificial Intelligence Sensor System

Artificial Intelligence Sensor System
Self diagnostic system using semiconductor circuit informs the cause of error at LCD display window for easy diagnostic and convenient corrective action when normal device operation is unable due to internal/external environment change. Also, it is included with self-protection system that shuts off the current by self diagnostic when malfunction by overcurrent occurs
(ex: function to detect insufficient water flow / water leakage).

Optimized ionic water generation system

Alkaline water pH may be different by the water quality of installed location and generated water volume.
We have established system to generate optimized ionic water at any condition by segmenting the electric current applied to the electrode into 38 fine steps.
The system checks the tap water pressure and input volume to the device in real time, and displays the pH and ORP change at LCD display window so that you can drink optimal ionic water. In addition, it also has feature to change fixed pH and ORP value of 4-level alkaline water & 2-level acidic water.

Test and Voice Message Service for Filter Usage and Exchange Time

It informs filter change time by text and voice which eliminates specific management.
- Filter lifespan can be different according to the water quality of each country.
- It can generate clean and clear optimal ionic water by adding system function to change filter lifespan according to the tap water quality status.

What is Electrolytic Reduced Water ?

Water (H₂O) is composed of tetrahedral structured H+ and OH- ion hydrogen bond, and drinking water usually contains Ca²+, Mg²+, Na+, K+, Cl-, S²-, P³- ions, too. Electrolysis the purified water generates alkaline ionic water that contains abundant OH- ion and mineral ions such as Ca²+, Mg²+, Na+ from cathode electrode by hydrogenation (H₂) reaction. Also, acidic ionic water that contains abundant H+ ion and mineral ions such as Cl-, S²-, P³- from anode electrode by oxygen (O₂) generation reaction.


Anode: 2H₂O -> O₂ + 4H+ + 4e- + 1.229V (Eo)
Cathode: 2H₂O + 2e- -> H₂ + 2OH- +0.828V (Eo)


pH is the index of water acidity, has range between 1~14. It indicates alkaline when the number is above 7, acid when it is under 7 with 7 as its middle point.


pH = log[H+]

It increases 30% of mineral content more than normal tap water, activates mineral, helps water absorption because of smaller water particle size, and performs important role in improving gastrointestinal symptoms (chronic diarrhea, indigestion, abnormal fermentation in stomach, hyperacidity).

Product Specification

 Product Size  295 Ⅹ 150 Ⅹ 370(W Ⅹ L Ⅹ H)mm
 Water supply type

 Direct supply type

Weight

5 Kg

Suitable water
pressure/temperature

3.0~3.5Kgf/Cm² , 4~30 ℃

Rated power

AC85~220V/50~60Hz

pH Level

Alkaline : pH8.5~10.0, Acidic: pH6.5~5.0

Power consumption

200W

 

Display Indication Type LCD display
Button Type Touch type

PCB
(SMPS type)

 

Purified water Step 1
Alkaline water Step 4(pH10.0, 9.5, 9.0, 8.5)
Acidic water Step 2(pH6.5, 5.0 )
Generation capacity 2 Liter/Min
Water supply type Automatic solenoid-type control
Operation type Flow meter pulse signal operation type 
(more than 16 pulses)
prevention function PCB error happened by Overcurrent DCV 30V/350W, maintain until 12A
Water purification type Filter 1st filter SEDI + Pre-carbon Effective amount of water purification 6 months(3,600 ℓ )
  2nd filter SEDI + Pre-carbon + Post-carbon + vitamin or possible ultra fiber 12 months(7,200 ℓ )
When 10
liter
of water is provided a day
Filter exchange time & Filter reset function Exchange the filter when filter exchange icon is turned on. 9999(LCD) Cartridge method(built-in filter)
Press 5 seconds the changed filter button when it is in ready state to reset
Amount of Filter use As a flow sensor accumulation type, amount of use is displayed on the LCD screen.
Electrolyzer Electrolysis method Continuous Electrolysis method
Type Plate
Number of electrode plates 7 plates (Platinized titanium), 9 plates(possible to add electrode plates for alkaline water)
Electrodes cleaning Auto washing after water outgoing (Time: about 10sec)
Septum GORE-TEX
Water outgoing type Dedicated water outlet

 

How to use

* Press the main power button to begin water extraction.

 

 

 

* When you select the desired water type - alkaline, purified, or acidic - the display will change as shown below.

There are 4 levels to be selected from for alkaline water. When the needed level is selected, the LCD panel will display the level's number.
(Please check the pH and ORP that are displayed on the LCD panel)

 

 

* Purified water is displayed as Level 0.
pH and ORP are not displayed on the LCD panel.

 

 

 

* There are 2 levels to be selected from for acidic water. When the needed level is selected, the LCD panel will display the level's number.
(Please check the pH and ORP that are displayed on the LCD panel.)

Check whether error is detected (lack of flux, leakage, over flux)

Model name Error code Conditions for detection Remakes
Special ERR1 (lack of flux) Detection/ Turned off standby state when below 16pulse (=water supply flux 1800ml) on the flowmeter within 15 seconds after water discharge standard setting value modification is possible (refer to the explanation of function mode)
ERR2 (leakage) Detection / beep sound is generated when below 2pulse(=water supply flux 100ml) on the flowmeter after discharge water stoppage standard setting value modification is impossible (Replacement to new Solenoid valve and re-assembly after alien substance removal after decomposition)

 

Product function and setting

Mode FN 1
Description Change the voice volume and beep sound
Model Special
Status of the device 
before starting 
the process
It is only possible when the machine is extracting water. If the machine stand by, start from extracting water.
First step Press 'Menu' button once to display FN1 on filter life LCD window. 
*If error code come out, cannot control this function* 
(Please solve error code and try again.)
Set 3
How to change Acid level 2 button for going up. Acid level 1 button for going down. (Min.0 ~ Max.9)
Save Press on/off or power botton to save.

 

Mode FN 2
Description When the pH level of produced water from installation
condition 
(tap water amount and ingredient) is too low or too high, reset the setting.
This function for improving the machine and life.
Model Special
Status of the device 
before starting 
the process
It is only possible when the machine is extracting water. If the machine stand by, start from extracting water.
First step Press 'Menu' button twice to display FN2 on filter life LCD window. 
*If error code come out, cannot control this function* 
(Please solve error code and try again.)
Set Control the pH level refer to setting list on shipping.* Shipping set for 7 plates.
Select level Press 'Alkaline ' button to select Alkaline water level. 
Press 'Acid' button to select acid water level. 
The lamp blinks come under level.
How to change At each level button for pH level going up.Possible to control close pH level.
Filter button for pH level going down.(Min.-19~Max.+19)
* To the original state by pressing 'Purify' button.
Save Press on/off or power botton to save.